KS Amp's__ 8x Amps (6x TA-4U and 2 TA-2D)
2 frames for hanging / stacking the system.
The KS AUDIO T LINE is a Line Array system which sets the standard in
audio quality for all live event. The enclosure is a 2 way design and
has a basic dispersion of 90° by 5° and a frequency response of 60Hz
to 19KHz. The addition of the KS AUDIO subwoofer T SUB extends the
frequency response to 35Hz. Each T LINE enclosure is loaded with 2 x
12” speakers and a 2” compression driver. Both types of driver use
The T LINE is powered by the KS AUDIO 4-channel amplifier TA 4D. Two channels in bi-amp mode, can power two T LINE cabinets, two TA 4D amplifiers therefore, can power an 8 box array.
The unmatched audio quality of the KS AUDIO line array T LINE is complimented by its superb ease of use. The T LINE is controlled by the company’s Firtec technology in the FIRMOD 2® controller module. It is common practice these days to use array configuration software to determine the configuration of a line array. These types of software claim the ability to make very complex mathematical calculations (to determine the behavior of the wave front) based upon 2 or 3 physical measurements of a room. This cannot and does not work. At best, this method results in a different frequency response each time the configuration of the array is changed, at worst the complete breakdown of the wave front.
The KS AUDIO approach is to provide the user with a number of different array configuration presets. These presets show the correct angle to be used between each of the boxes in the array, and the attachment point of the rigging to the fl ying bumper. The REMOTE software is also used to control all system parameters in the FIRMOD 2® module.