Register Register      Login Login
Currency:
Email Twitter
Cart Shopping Cart
Item(s): 0    $0.00

Catalog

SHOP BY:
Brand Location

M50QH HDSp+ETH 4CH Power Amplifier (Powersoft Audio)

M50QH HDSp+ETH 4CH Power Amplifier (Powersoft Audio)
ID
124193
Condition
Excellent Condition Help
Item is used but in perfect condition.
Warranty
Factory
Region
Europe
Age
0-3
Usage
Television / Broadcast
Voltage
Auto 90-240V/50-60Hz
Case
Unspecified
M50QH HDSp+ETH 4CH Power Amplifier (Powersoft Audio)
M50QH HDSp+ETH 4CH Power Amplifier (Powersoft Audio)
M50QH HDSp+ETH 4CH Power Amplifier (Powersoft Audio)
M50QH HDSp+ETH 4CH Power Amplifier (Powersoft Audio)
Share |
Image Questions?
If you would like more or better images, click here to submit a request.
We Can Help!
Have a question? Click here to contact us.
Disclaimers
Unless otherwise specified accessories and parts shown in photographs are not included. For clarification please contact us.

Equally versatile in both portable and

installed system configurations and with

its 4 channels delivering up to 5,000

W all neatly packed in one single rack

unit weighing just over 7 kg / 16 lb, the

M50Q HDSP+ETH is an incredibly

flexible, cost-effective solution for small

to medium sound systems.

The M50Q HDSP+ETH provides

unparalleled levels of control and

monitoring through the Armonía Pro

Audio Suite™ software, with the

same user interface and on the same

network as all Powersoft amplifiers.

Locally, the M50Q HDSP+ETH

lets the user access up to four presets

per pushbutton on the rear panel.

Furthermore, the high-performance DSP

is tucked away inside and safe against

accidental or intentional tampering.

Benefitting from core technologies

of Powersoft’s flagship K Series, the

M50Q HDSP+ETH sets a class

standard in efficiency leading to low

power consumption, and consequently

to less money spent on electricity, all in

an eco-friendly way.

The M50Q HDSP+ETH comes with

4 years warranty and, like all Powersoft

products, is entirely designed and made

in Italy.

General  
Number of channels 4
   
Output power Single channel mode Distributed line* Bridge mode
    4 Ω 8 Ω   70V 100V   8 Ω    
    1250 W 750 W   1000 W 1250 W   2500W    
Max output voltage / current 135 Vpeak / 65 Apeak     270 Vpeak
   
AC Main Power  
Power supply Universal, regulated switch mode
Nominal power requirement 100-240 V ±10%, 50-60 Hz
Operating voltage 90 V - 264 V
Power consuption** 115 V   230 V
Idle 64 W 0.6 A   64 W 0.51 A
1/8 of max output power @ 4 Ω 905 W 11.6 A   905 W 5.8 A
1/4 of max output power @ 4 Ω 1772 W 22.2 A   1772 W 11.1 A
   
Thermal  
Operating temperature range 0° - 45° C - 32° - 113° F
Thermal dissipation** 115 V   230 V
Idle 218 BTU/h 54.9 kcal/h   218 BTU/h 54.9 kcal/h
1/8 of max output power @ 4 Ω 955 BTU/h 240.7 kcal/h   955 BTU/h 240.7 kcal/h
1/4 of max output power @ 4 Ω 1781 BTU/h 448.8 kcal/h   1781 BTU/h 448.8 kcal/h
   
AUDIO  
Gain 32dB, 30dB, 28dB, 26dB, 24dB, 22dB, 20dB, 18dB, 14dB, 4dB, -∞, user selectable
Input sensitivity 1.94 V / 8 dBu
Max input level 6 V / 17.8 dBu
Frequency response 20 Hz - 20 kHz (±0.5 dB) @ 1 W, 8 Ω
S/N ratio > 110 dB (20 Hz - 20 kHz, A weighted)
Crosstalk separation > 70 dB @ 1kHz
THD+N < 0.05% @ 1/2 full power
IMD < 0.02%
Input impedance 10 kΩ balanced
Slew rate 50 V/μs @ 8Ω, input filter bypassed
Damping factor > 5000 @ 100 Hz
   
DSP  
DSP architecture Analog Devices ADAU® 1701 DSP
AD Converter Cirrus Logic CS 5381, 2 channel, 24 bit @ 48 kHz, 120 dB S/N
DA Converter Cirrus Logic CS 4398, 2 channel, 24 bit @ 48 kHz, 120 dB S/N
Internal precision Fixed point
Firmware Network upgradable firmware
Latency 0.644 ms fixed latency architecture
Input equalizer up to 5 biquad IIR filters (PEQ, shelving, band pass, band stop, all pass)
Output equalizer up to 12 fully parametric per channel
Crossover Butterworth, Linkwitz-Riley, Bessel: 6 dB/oct to 48 dB/oct
Delay 340 ms input delay plus 10 ms per output
Limiters Peak limiter, RMS limiter, frequency dependent RMS limiter
Damping control < 120 Hz, range ±2 Ω
   
Front panel  
Indicators and Controllers 2 x LED - Status
2 x LED - Over-temperature protection
4 x LED bar - Signal level and over-temperature protection
4 x Knob - Level attenuator (stepped)
1 x Power switch - 
Connectors  
AC main 1 x IEC C14 connector - 15 A max (region-specific power cord provided)
Audio signal input 4 x XLR - Signal input
Auxiliary voltage 1 x 2 pin Phoenix MC 1.5/2-ST-3.81 - External voltage connector (DSP version only)
Loudspeakers 4 x speakON - Neutrik NL4MD
Network/data 1 x Rj45 socket - RS485 data connection (non-DSP version)
   
Rear panel  
Indicators and Controllers 1 x Push-button - Link channel pair
   
Construction  
Dimensions (L x H x W) 483 mm x 44.45 mm x 358 mm (19.0 in x 1.8 in x 14.1 in)
Weight 7.4 kg (16.3 lb)

Description

With 5,000 W across four channels in a single rack space at a mere 7.4kg/16.3lbs weight, the M50Q is equally versatile in touring and permanently installed racks. Legendary sound quality deriving from Powersoft?s patented technologies, and outstandingly high efficiency are making the M50Q the leader in its class. Optimized for mid-sized sound systems and 4? loads, it is a fantastic value, practically as well as commercially.

In use worldwide by leading touring and event sound companies, Powersoft amplifiers are preferred among the top ranking system designers, sound engineers, and contractors for providing reliable premier-grade power and headroom in the smallest possible package size. Maximum efficiency warrants minimum current draw, heat dissipation and power consumption, resulting in ?green? products, saving the user a substantial amount of money over time.

The M50Q is also available with on-board DSP and Ethernet interface. While the high-performance DSP with FIR/IIR filters is hidden inside and safe against accidental or intentional tampering, monitoring of vital system and amplifier data can be done via Armonía Pro Audio Suite™ software, the same user interface on the same network as for all Powersoft amplifiers. Locally, the M50Q HDSP+ETH lets the user access up to four presets per pushbutton on the rear panel.

Interface available for MediaMatrix, Crestron and AMX control and monitoring systems.